Skip to content

D-Box™ (V-Mount, Base Unit)

Sold out
$299.00
SKU 204700

UPC 702534253906

DISCONTINUED

WC Pro Power Plate available for an additional $150 by emailing sales@woodencamera.com or making an order note.

D-Box (Power Distribution) allows for user selectable power outputs including 2pin, 4pin, 4 pin Hirose, 3 pin Fischer, D-Tap, and USB. Allows for up to 6 simultaneous outputs with a maximum draw of 3A per output (24V output is 1A max each) and 10A total draw limited by an easily accessible fuse. Left side panel opens to service fuse and to disconnect and remove connector panels.

Please Note: In addition to the digital or glass fuse governing the output panels of the D-box, his product contains a secondary fuse for the D-tap ports of the attached battery plate. This fuse is located in a fuse holder within the plate and replacements can be purchased here: F10A Fast Blow Fuse

The D-Box (V-Mount, Base Unit) comes standard with a male V-Mount on one side and female V-Mount on the other. Power is passed though to D-Box and to camera.

Choose from any of the below (sold separately):
- 2pin Connector
- 4pin Connector
- 4pin Hirose
- 3pin Fischer
- D-Tap
- USB
- Blank

Note: Slots 2 & 3 cannot both host D-Taps due to internal interference with one another. Please select D-Tap for one slot or the other. If you are looking for a D-Tap Breakout Cable, choose 1 to 4 D-Tap Splitter Cable

Specifications:
Weight: 610g (1.3 lbs)
Dimensions: 50.8 x 101.6 x 152.4 mm ( 2 x 4 x 6 in)


Capture.Share.

*Manufactured under licence
Our Brands