Dual Director's Monitor Cage v2
Dual Director's Monitor Cage allows for the attachment of two LCD displays using top, bottom, or rear 1/4-20 screws. Top and bottom bracket raise and lower to fit cage properly. Foam grips for secure, comfortable holding. Battery mounting bracket for attachment of V-Mount or Gold Mount plates, wireless receivers, or additional accessories. Included offset adapters allows attachment of Monitor Cage to C-stands (baby pin).
(24) 1/4-20 x 1/2" button head screws
(12) 1/4-20 x 3/8" button head screws
(4) 1/4-20 x 2" socket cap screws
(8) M3 x 8mm philips screws (for V-Mount plate)
(8) M3 x 12mm philips screws (for Gold Mount plate)
(2) M2.5 x 4mm socket cap screw (for Odyssey 7Q location pin)
Weight: 1360.78 g (3.0 lbs)
Dimensions: 431.8 x 127 x 203.2 mm (17 x 5 x 8 in)
Director’s Monitor Cage Instructions
Oddyssey 7Q Configuration
For powering LCD and wireless receiver, consider the WC V-Mount (Dual D-Tap) or WC Gold Mount (Dual D-Tap).
You can also attach a Matthews TVMP/Bale Block if a locking C-Stand mount is desired.
Director's Monitor Cage Overview: