Panasonic GH4-YAGH Camera Accessory Kit (Base) Configuration Guide.$723186600VIEW KIT »
PANASONIC GH4-YAGH CAMERA ACCESSORY KIT (PRO)
The Panasonic GH4-YAGH Camera Accessory Kit (Pro) is a professional camera support package designed for the Panasonic GH4-YAGH camera. The GH4-YAGH accessory package includes: Camera Cage (GH4-YAGH) for secure camera attachment, the DSLR 15mm Bracket, a rod mount for holding the two 15mm Rods (6”) at the correct lens height, NATO Handle Kit (Plus, 70mm), a quick release handle that attaches to the top of the cage, UVF Mount (No Clamp) for holding EVFs & LCDs, Dovetail Clamp for easy mounting to an ARRI standard dovetail like the included Safety Dovetail (8”), two Rod Clamps (15mm LW) one that attaches to the back of the Camera Cage that holds the two additional 15mm Rods (9”), and the second provides multiple 1/4-20 mounting points for the Recorder Slide which allows for the attachment of either a V-Mount or Gold Mount battery plate on one side and an on-board recorder on the other.
MORE INFO »BUY NOW
Form fitting camera cage for Panasonic GH4-YAGH with mounting points on the top and side while leaving all of the camera's vital controls on the right grip and left side easily viewable and accessible. Fold out LCD screen can be positioned easily and eyepiece can be utilized while cage is attached.$399SKU:182100MORE INFO »BUY NOW
Quick release, multi-funtion top handle that attaches and detaches without tools or screws. This rotating top handle is designed with a ratcheting 360° rotating grip and integrated shoe mount. Safety NATO Rail (70mm) included in kit.$250SKU:175700MORE INFO »
EVF/LCD mount that is version of our popular UVF Mount v2 without the 15mm Tube Clamp portion. Works great with the NATO Handle (Plus) which has an integrated 15mm clamp. Accepts most EVFs & LCDs.$379SKU:179900MORE INFO »BUY NOWMORE UVF/LCD MOUNTS »
2x 15mm ROD (6")
Set of two 6" 15mm diameter support rods used for mounting camera accessories like follow focus, matte box, lens support, servo motors, and more.
Power plate and on board recorder attachement accessory. Hole patterns available for Ki Pro, Hyperdeck, Codex, Odyssey 7Q, pix240, V-Mount, Gold Mount, audio wireless receiver boxes, and 1/4-20 threaded and pass through holes. Dual rosette mounts and sliding capability allow for positioning in any direction.$399SKU:191100MORE INFO »BUY NOW
ARRI standard dovetail with safety catch on one end and stopper screw on other to prevent accidental camera removal. Threaded 1/4-20 and 3/8-16 holes for accessory mounting and tripod attachment.$180SKU:151100MORE INFO »
Professional camera mattebox that includes the Swing Away Kit folding french flag, bottom flag, left & right side flags, 2x rotating filter stages, universal cloth donut, swing away bracket, rubber bellows set, clamp on adapters set, and swing aways inserts.$1,995SKU:202100MORE INFO »BUY NOWMORE MATTEBOXES »
Quick release shoulder rig based on ARRI standard dovetail & rosettes. Includes adjustable crossbar with NATO standard rail, Rosette Arms (Short) for comfortable grip positioning, and Arca-Swiss dovetail for easy shoulder pad adjustment & removal.$1,250SKU:203800MORE INFO »BUY NOWMORE SHOULDER RIGS »
Wooden Camera brand V-Mount (XLR 4 PIN) is a camera power plate utilizing an IDX V-Mount and standard 4 pin XLR power connector. Plate provides unregulated 12V power (12-16V depending on battery connected).$250SKU:179200MORE INFO »
Wooden Camera brand Gold Mount (XLR 4 PIN) is a camera power plate utilizing an Anton Bauer Mount and standard 4 pin XLR power connector. Plate provides unregulated 12V power (12-16V depending on battery connected).
Camera lens support system supports heavy lenses when using 15mm lightweight rods. Loosen thumbscrews for quick, snap on installation. Vertical post can move laterally to accommodate skewed baseplates.$295SKU:175400MORE INFO »BUY NOWMORE LENS SUPPORT »
1/4-20 HOT SHOE
Replicates the camera flash shoe found on still cameras. Attaches to any 1/4-20 threaded hole. Great for mounting on-camera lights, microphone shock mounts, flashes, and more. Also referred to as a cold shoe.$25SKU:142000MORE INFO »BUY NOW
C-BOX (CONVERTER, D-TAP)
Video converter that accepts HDMI & 3G HD-SDI input. Draws power from the D-Tap of a battery or battery plate using the included cable. Provides 5V mini USB power via included cable to power wireless HDMI transmitters.$599SKU:176200MORE INFO »BUY NOWC-BOX (V-MOUNT)C-BOX (GOLD MOUNT)
UNIVERSAL OFFSET BRACKET
Attaches by an ARRI style accessory mount, 3/8-16 with locating pins adjacent. Also attaches by using two included 1/4-20 or 3/8-16 screws spaced up to 77mm (3") apart center to center. Works great with Universal Hot Shoe & Microphone Shock Mount.$65SKU:199700MORE INFO »BUY NOW
MICROPHONE SHOCK MOUNT
Attaches by an ARRI style accessory mount, 3/8-16 with locating pins adjacent. It can also attach by using an included 1/4-20 screw. Rubber support bands isolates microphone from vibration. Works great with Universal Offset Bracket.
Attaches by an ARRI style accessory mount, 3/8-16 with locating pins adjacent. Also attaches by using an included 1/4-20 or 3/8-16 screw. Provides a standard shoe mount for attaching accessories. Works great with Universal Offset Bracket. This product is also commonly referred to as a cold shoe.$65SKU:199800MORE INFO »BUY NOW
UNIFIED BRIDGEPLATE (19mm)
ARRI standard bridge plate with 19mm studio rods (rods spaced 104mm center to center). Converts from RED standard height to ARRI standard height making it compatible with any type of camera rig. Slotted design accommodates non-standard screw spacings.$499SKU:223100MORE INFO »BUY NOWMORE BRIDGEPLATES
ARRI standard bridge plate with 15mm studio offset spacing (rods spaced 100mm center to center). Converts from RED standard height to ARRI standard height making it compatible with any type of camera rig. Slotted design accommodates non-standard screw spacings.$499SKU:223200MORE INFO »BUY NOWMORE BRIDGEPLATES
Cable Clamp is a multi-use camera cable clamping mechanism that can provide strain relief for HDMI, BNC, power, and other cables where frequent tugging could cause damage to the camera. Attaches by one or more 1/4-20 screws.$60SKU:163800MORE INFO »