BASE KIT RED DSMC2 Accessory Kit (Base) Configuration Guide.$1,0064264500VIEW KIT »
RED DSMC2 ACCESSORY KIT (PRO, 19mm)
The RED DSMC2 Accessory Kit (Pro, 19mm) is a professional camera support package designed for the RED Weapon, Epic Weapon, Scarlet Weapon, & Raven cameras. The RED DSMC2 accessory package includes: Pass Through Top Plate (RED DSMC2), a top mounting cheeseplate with 26pin LCD connection and 3pin interface for easy attachment of the Trigger Handle (RED DSMC2), a top handle that attached directly to the camera brain, Ultra Arm Monitor Mount (1/4-20 to 1/4-20, 3") for holding EVFs & LCDs, A-Box (RED DSMC2) for XLR audio inputs, Easy Riser (RED DSMC2), a camera riser shim plate that attaches to the Bridgeplate (19mm), an ARRI style bridge plate with 19mm studio spacing for holding the two 19mm Rods (12") at the correct lens height and attaches easily to an ARRI standard dovetail like the included Safety Dovetail (12"). MORE INFO »BUY NOW15mm STUDIO »
Provides 26pin LCD connection and 3pin trigger handle interface. Arrays of 1/4-20 holes in Red spacing, 3/8-16 holes for large accessories, and the ARRI standard accessory mount in several places. Attaches to top of camera by (4) 1/4-20 captured screws.$350SKU:229400MORE INFO »
A camera riser shim plate that can combine with Bridgeplate (19mm) and (15mm Studio) or original ET baseplates for rod support at correct lens height. Combine with LW15mm Bracket (Weapon/Epic-W/Scarlet-W/Raven) for lightweight rods at correct lens height. $160SKU:213700MORE INFO »
3" articulating LCD/EVF monitor arm with two sets of 25mm (1 inch) double ball joints which allow a monitor or accessory to be positioned in just about any orientation.$165SKU:232000MORE INFO »BUY NOWMORE UVF/LCD MOUNTS
Attaches without tools directly to the top of the camera brain or to the Easy Top (RED DSMC2) to trigger the camera through the pogo interface. Arrays of 1/4-20 holes in Red spacing, 3/8-16 holes for large accessories, and the ARRI standard accessory mount in several places.$350SKU:228000MORE INFO »BUY NOW
ARRI standard bridgeplate with 19mm studio rods. Converts from RED standard height to ARRI standard height. Slotted design accommodates non-standard screw spacings.$499SKU:223100MORE INFO »
ARRI standard dovetail with safety catch on one end and stopper screw on other to prevent accidental camera removal. Threaded 1/4-20 and 3/8-16 holes for accessory mounting and tripod attachment.$260SKU:151200MORE INFO »
An XLR audio adapter made for the RED Weapon, Epic-W, Scarlet-W, & Raven cameras. Adapts industry standard balanced XLR male plugs to 3.5mm balanced plugs (female). Highest quality professional grade connectors.$199SKU:216200MORE INFO »
Professional camera mattebox that includes the Swing Away Kit folding french flag, bottom flag, left & right side flags, 2x rotating filter stages, universal cloth donut, swing away bracket, rubber bellows set, clamp on adapters set, and swing aways inserts.$1,995SKU:202100MORE INFO »BUY NOWMORE MATTEBOXES »
Quick release shoulder rig based on ARRI standard dovetail & rosettes. Includes adjustable crossbar with NATO standard rail, Rosette Arms (Short) for comfortable grip positioning, and Arca-Swiss dovetail for easy shoulder pad adjustment & removal.$1,250SKU:203800MORE INFO »BUY NOWMORE SHOULDER RIGS »
Cable-less V-Mount battery plate that utilizes an IDX brand plate with two D-Taps and the WC pogo interface module. Attaches without tools directly to the back of the RED Weapon, Epic-W, Scarlet-W, Raven, Base Expander Module, REDVolt Expander Module, and some third party modules.$645SKU:220600MORE INFO »BUY NOW
Cable-less Gold Mount battery plate that utilizes an Anton Bauer brand plate with two D-Taps and the WC pogo interface module. Attaches without tools directly to the back of the RED Weapon, Epic-W, Scarlet-W, Raven, Base Expander Module, REDVolt Expander Module, and some third party modules. $645SKU:220800MORE INFO »
Custom version of our popular D-Box that adds power distribution, standardized remote start/stop, and hot swap abilities for the RED DSMC2 cameras. Tool-less installation utilizes our Cable-less interface which attaches directly to the back of the camera body. Utilizes an IDX V-Mount battery plate.$1,295SKU:233900MORE INFO »
Custom version of our popular D-Box that adds power distribution, standardized remote start/stop, and hot swap abilities for the RED DSMC2 cameras. Tool-less installation utilizes our Cable-less interface which attaches directly to the back of the camera body. Utilizes Anton Bauer Gold Mount batter plate.$1,295SKU:234000MORE INFO »
Modular handle system designed for larger camera builds and back of camera operation. The Master Top Handle (RED DSMC2) attaches in two places to either the Easy Top (Weapon) or the Pass Through Top Plate (Weapon) by four 1/4-20 screws, making it extremely secure.$995SKU:248200MORE INFO »
Ultra-lightweight EVF mount for the RED DSMC2 viewfinder that allows for easy positioning. The system moves forwards and backwards over the lens area on two 15mm rods, left and right on a 19mm rod, and a friction knuckle allows for quick tilting of the EVF without having to loosen a thumbscrew. $550SKU:248400MORE INFO »
Ultra-lightweight extension for the AIR EVF Mount (RED DSMC2 EVF). The arm extends from 10.5 inches (26 cm) to 14.5 inches (37 cm) and a friction knuckle allows for quick tilting of the EVF without having to loosen a thumbscrew. Included on the arm is an eyepiece leveller attachment point for adding ARRI or 3rd party EPLs.$480SKU:249400MORE INFO »BUY NOW
Top cheeseplateplate for RED Weapon, Epic-W, Scarlet-W, Raven, and other DSMC2 cameras. Arrays of 1/4-20 holes in Red spacing & 3/8-16 holes for large accessories. Two interfaces convert LCD/EVF pogo pins to standard 16pin LEMO compatible connectors and a third interfaces communicates with start/stop trigger on top of the camera. $599SKU:213900MORE INFO »BUY NOW
Provides an external WiFi antenna mount for the RED DSMC2 cameras and increases the signal range when using apps like FoolControl. This product is not a signal repeater but replaces the internal antenna altogether. The WiFi Side Plate attaches in place of the decorative right side panel and does not interfere with RED products.$499SKU:228800MORE INFO »
Provides 26pin connection on top and bottom for turning the RED 4.7" Touchscreen into a tool-less monitor! It also works great with the DSMC2 RED EVF (OLED) when using RED's integrated mount. This can also be used as a riser for the LCD to add 15mm (.6 inches) of height above the camera top.$140SKU:233800MORE INFO »
Allows for any standard V-Mount or Gold Mount plate to be attached directly to the back of the RED Weapon, Scarlet Weapon & Raven cameras or to the back of the Base Expander and REDvolt Expander without tools! Compatible with the WC V-Mount (Epic/Scarlet) and WC Gold Mount (Epic/Scarlet) battery plates.$249SKU:214000MORE INFO »BUY NOW
Allows the RED displays to be attached to products like the Easy Top (Weapon/Epic-W/Scarlet-W/Raven) and the RED LEMO Adapter A. The male LEMO compatible connector attaches to any RED Standard 16pin LEMO compatible connector and the female pogo connector can be bolted to any two 1/4-20 screws holes up to 54mm apart.$205SKU:221400MORE INFO »BUY NOW
Allows the RED displays to be moved off the top of the RED Weapon/Epic-W/Scarlet-W/Raven and into a position more easily viewed. The male pogo connector attaches to the camera body without tools and the female pogo connector can be bolted to any two 1/4-20 screws holes up to 54mm apart.$245SKU:221100MORE INFO »
Allows the original RED displays to be attached to the new RED Weapon/Scarlet-W/Raven DSMC2 cameras. The male pogo connector attaches to the camera body without tools and the Male LEMO compatible connector attaches to the original RED LCD/EVF using the standard 16pin LEMO compatible connector. $205SKU:221700MORE INFO »
A side mounting plate that attaches directly to the side of the camera via four captured M3 screws. 1/4-20 holes in RED standard spacing and ARRI accessory mount in two places. M6 threaded ARRI rosette also available for handles like our Wooden Camera Handgrip (Right).$150SKU:227800MORE INFO »
A NATO standard side mounting arm for RED Weapon, Scarlet-W, and Raven cameras. Attaches to Easy Top (Weapon/Scarlet-W/Raven) and Easy Riser (Weapon/Scarlet-W/Raven) to expand mounting surface for accessories. Spring loaded pins on each end to prevent accidental accessory removal. $140SKU:227700MORE INFO »
A simple PL lens mount that attaches to RED Weapon, Scarlet Weapon, Epic, and Scarlet cameras and is also compatible with Blackmagic 4K modified cameras. No lens data is passed through. Protective recessed area for RED data pins. Machined out of aircraft aluminum. PL cap is included.$399SKU:175900MORE INFO »
A 15mm rod support bracket that when combined with Easy Riser hold lightweight 15mm rods on RED Weapon, Epic Weapon, Scarlet Weapon, and Raven cameras at the correct lens height.$140SKU:213800MORE INFO »
Video converter that accepts HDMI & 3G HD-SDI input. Draws power from the D-Tap using the included cable. Provides 5V mini USB power via included cable to power wireless HDMI transmitters.$599SKU:176200MORE INFO »
Lens support system that supports heavy lenses when using 19mm or 15mm studio rods. Convertible between centered 19mm support to 15mm studio offset by unlocking thumbscrew.$295SKU:175500MORE INFO »
Attaches by an ARRI style accessory mount, 3/8-16 with locating pins adjacent. Also attaches by using an included 1/4-20 or 3/8-16 screw. Provides a standard shoe mount for attaching accessories. Works great with Universal Offset Bracket.$35SKU:199800MORE INFO »
Replicates the camera flash shoe found on still cameras. Attaches to any 1/4-20 threaded hole. Great for mounting on-camera lights, microphone shock mounts, flashes, and more. Also referred to as a cold shoe.$25SKU:142000MORE INFO »
Attaches by an ARRI style accessory mount, 3/8-16 with locating pins adjacent. It can also attach by using an included 1/4-20 screw. Rubber support bands isolates microphone from vibration. Works great with Universal Offset Bracket.$65SKU:199900MORE INFO »
Attaches by an ARRI style accessory mount, 3/8-16 with locating pins adjacent. Also attaches by using two included 1/4-20 or 3/8-16 screws spaced up to 77mm (3") apart center to center. Works great with Universal Hot Shoe & Microphone Shock Mount.$65SKU:199700MORE INFO »
