Unified VCT Wedge Plate
UPC 702534256587
In celebration of Earth Month, for every order placed we’ll plant a tree in partnership with One Tree Planted.
Learn MoreUPC 702534256587
IN STOCK Complete purchase by 3pm CST and order will ship same business day.
Unified VCT Wedge Plate is a Sony VCT-14 standard device that interfaces with the bottom of all Unified Baseplates. Our special reduced height ARRI dovetail shape allows each Unified camera rig to be quickly installed and balanced properly over your shoulder. Safety pin and stopper screws on the ends prevent accidental removal. Threaded M6 ARRI standard rosettes are found on each side and can be combined with our Rosette Standoffs and Rosette Arms for a quick, handheld configuration. Also present are 1/4-20 threaded holes and the ARRI standard accessory mounts (3/8-16 threaded hole with locating pins adjacent). At the rear of the wedge plate, a knob is present which can be tightened after installing onto the VCT-14 Tripod Plate to prevent any potential wiggle.
A key slot is also present on the top center for times when you might need to attach the Wedge Plate directly to the camera bottom using the included 1/4-20 and 3/8-16 low profile screws.
Included:
(2) 1/4-20 Low Profile Screws
(2) 3/8-16 Low Profile Screws
Specifications:
Weight: 610g (1.3 lbs)
Dimensions: 50.8 x 101.6 x 254 mm ( 2 x 4 x 10 in)
D-Tap to 2pin Cable (18") has a standard D-Tap on one end and a 0B, 2pin connector on the other. Cable is wired in an ARRI standard configuration w...
View full detailsD-Tap to 2pin Cable (12") has a standard D-Tap on one end and a 0B, 2 pin connector on the other. Cable is wired in an ARRI standard configuration ...
View full details2pin to 2pin Cable (18") is a 0B, 2 pin cable that is wired in an ARRI standard configuration with a 18 inch cable length.
2pin to 2pin Power Cable (12") is a 0B, 2pin cable that is wired in an ARRI standard configuration with a 12 inch cable length.
IN STOCK Complete purchase by 3pm CST and order will ship same business day. Unified Bridgeplate (15mm Studio) is an ARRI standard bridge plate wit...
View full details855.966.3226
Mon-Fri 9AM-5PM CST
support@woodencamera.com
WOODEN CAMERA, INC. IS NOT AFFILIATED OR ASSOCIATED WITH OR ENDORSED OR SPONSORED BY ARRI GROUP, BLACKMAGIC DESIGN PTY, LTD., BOLEX, SA, CANON INC., FISCHER CONNECTORS SA, LEMO SA, NIKON CORPORATION, IKONOSKOP AB, PANASONIC CORPORATION, RED.COM, INC., SONY CORPORATION, OR VISION RESEARCH INC. WOODEN CAMERA, INC. HAS NO RIGHT OR CLAIM TO ANY ARRI GROUP, BLACKMAGIC DESIGN PTY, LTD., BOLEX, SA, CANON INC., FUJIFILM HOLDINGS CORPORATION, NIKON CORPORATION, IKONOSKOP AB, OLYMPUS CORPORATION, PANASONIC CORPORATION, RED.COM, INC., SONY CORPORATION, OR VISION RESEARCH INC TRADEMARK. ©WOODEN CAMERA, INC. 2011-2018